The following How-To Guides are provided in PDF format to assist you with the maintenance, repair and upgrading of your Tregaskiss® MIG guns, robotic peripherals and welding accessories.
- How to install TOUGH GUN I.C.E.® components on a TOUGH GUN® G1 series robotic MIG gun
- How to repair a Euro TOUGH GUN robotic MIG gun
- How to install air blast on a TOUGH GUN robotic air-cooled MIG gun
- How to change a liner on a TOUGH GUN robotic MIG gun equipped with wire brake
- How to install / replace a QUICK LOAD® liner on a TOUGH GUN ThruArm™ series robotic MIG gun with an LSR+ unicable
- How to install / replace a QUICK LOAD liner
- How to install / replace a conventional liner
- How to install / replace a neck on a TOUGH GUN G2 series robotic air-cooled MIG gun
- How to install / replace a neck on a TOUGH GUN G1 series robotic air-cooled MIG gun
- How to install / replace TOUGH LOCK® consumables
- How to install / replace TOUGH ACCESS™ consumables
- How to install a power pin to a MIG gun
- How to install the TOUGH GUN reamer
- How to install the TOUGH GARD® multi-feed system to the TOUGH GUN reamer
- How to install the TOUGH GUN wire cutter to the TOUGH GUN reamer
- How to mount the SR-500 sprayer to the TOUGH GUN reamer
- How to mount the RS-500 sprayer as a stand-alone unit
- How to use the TOUGH GUN neck checking fixture
Questions?
If you can’t find the answers you need online, please contact our Technical Services department by email or by phone at 1-855-MIGWELD (644-9353), option 3. Assistance is available Monday through Friday from 8:00 a.m. to 5:00 p.m. EST.