QUICK LOAD Liners

Save time and money by loading your liners from the front!

Innovative QUICK LOAD® liners install from the front of the MIG gun in less than half the time required to install conventional liners, increasing uptime, cost savings and safety

  • Requires less than half the time and effort to replace (compared to conventional liners)
  • Two-piece system with retainer installed inside the power pin on first use
  • Liner portion feeds from the front of the MIG gun
  • No need to cut and waste wire!
  • Avoid climbing over robotic tooling or transfer systems to remove the torch from the wire feeder
  • Change the liner from a safe zone in the robotic work cell
  • No need to climb up to change liners in semi-automatic MIG guns connected to boom mounted feeders

QUICK LOAD Liner System Components

The QUICK LOAD liner system is a two-piece system that requires the following components:

  • QUICK LOAD liner
  • QUICK LOAD liner retainer (installed inside the power pin on first use)

Specifications

  • Available for 0.023″ (0.6 mm) – 3/32″ (2.4 mm) wire sizes
  • Available in lengths of up to 15 feet for robotic applications
  • Available in lengths of up to 25 feet for semi-automatic applications

Product Compatibility

QUICK LOAD Liners

415-23-15Qfor 0.023″ wire, 15′ length; high carbon steel – round wound
415-30-6Qfor 0.030″ wire, 6′ length; high carbon steel – round wound
415-30-15Qfor 0.030″ wire, 15′ length; high carbon steel – round wound
415-35-6Qfor 0.035″ – 0.045″ wire, 6′ length; high carbon steel – round wound
415-35-10Qfor 0.035″ – 0.045″ wire, 10′ length; high carbon steel – round wound
415-35-15Qfor 0.035″ – 0.045″ wire, 15′ length; high carbon steel – round wound
415-35-25Qfor 0.035″ – 0.045″ wire, 25′ length; high carbon steel – round wound
415-116-6Qfor 0.045″ – 1/16″ wire, 6′ length; high carbon steel – round wound
415-116-10Qfor 0.045″ – 1/16″ wire, 10′ length; high carbon steel – round wound
415-116-15Qfor 0.045″ – 1/16″ wire, 15′ length; high carbon steel – round wound
415-116-25Qfor 0.045″ – 1/16″ wire, 25′ length; high carbon steel – round wound
415-564-6Qfor 1/16″ – 5/64″ wire, 6′ length; high carbon steel – round wound
415-564-15Qfor 1/16″ – 5/64″ wire, 15′ length; high carbon steel – round wound
415-564-25Qfor 1/16″ – 5/64″ wire, 25′ length; high carbon steel – round wound
415-332-6Qfor 0.078″ – 3/32″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-332-6
415-332-15Qfor 0.078″ – 3/32″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-332-15
415-332-25Qfor 0.078″ – 3/32″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-332-25

Back to Top

QUICK LOAD Liner Retainers

Required for initial installation only (sold separately)

415-24*for 0.078″ – 3/32″ wire
415-26*for 0.030″ – 5/64″ wire
415-37**for 0.030″ – 5/64″ wire
*Compatible with Tregaskiss® TOUGH GUN® robotic and fixed automatic MIG guns and Bernard® BTB and TGX® semi-automatic air-cooled MIG guns
**Compatible with most Tweco® MIG guns

Documentation

Consumables

How-Tos

Videos

Related Products

Product Updates

Related Articles

Additional Resources