- Requires less than half the time and effort to replace (compared to conventional liners)
- Two-piece system with retainer installed inside the power pin on first use
- Liner portion feeds from the front of the MIG gun
- No need to cut and waste wire!
- Avoid climbing over robotic tooling or transfer systems to remove the torch from the wire feeder
- Change the liner from a safe zone in the robotic work cell
- No need to climb up to change liners in semi-automatic MIG guns connected to boom mounted feeders
QUICK LOAD Liner System Components
The QUICK LOAD liner system is a two-piece system that requires the following components:
- QUICK LOAD liner
- QUICK LOAD liner retainer (installed inside the power pin on first use)
Specifications
- Available for 0.023″ (0.6 mm) – 3/32″ (2.4 mm) wire sizes
- Available in lengths of up to 15 feet for robotic applications
- Available in lengths of up to 25 feet for semi-automatic applications
Product Compatibility
QUICK LOAD Liners
| 415-23-15Q | for 0.023″ wire, 15′ length; high carbon steel – round wound |
| 415-30-6Q | for 0.030″ wire, 6′ length; high carbon steel – round wound |
| 415-30-15Q | for 0.030″ wire, 15′ length; high carbon steel – round wound |
| 415-35-6Q | for 0.035″ – 0.045″ wire, 6′ length; high carbon steel – round wound |
| 415-35-10Q | for 0.035″ – 0.045″ wire, 10′ length; high carbon steel – round wound |
| 415-35-15Q | for 0.035″ – 0.045″ wire, 15′ length; high carbon steel – round wound |
| 415-35-25Q | for 0.035″ – 0.045″ wire, 25′ length; high carbon steel – round wound |
| 415-116-6Q | for 0.045″ – 1/16″ wire, 6′ length; high carbon steel – round wound |
| 415-116-10Q | for 0.045″ – 1/16″ wire, 10′ length; high carbon steel – round wound |
| 415-116-15Q | for 0.045″ – 1/16″ wire, 15′ length; high carbon steel – round wound |
| 415-116-25Q | for 0.045″ – 1/16″ wire, 25′ length; high carbon steel – round wound |
| 415-564-6Q | for 1/16″ – 5/64″ wire, 6′ length; high carbon steel – round wound |
| 415-564-15Q | for 1/16″ – 5/64″ wire, 15′ length; high carbon steel – round wound |
| 415-564-25Q | for 1/16″ – 5/64″ wire, 25′ length; high carbon steel – round wound |
| 415-332-6Q | for 0.078″ – 3/32″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-332-6 |
| 415-332-15Q | for 0.078″ – 3/32″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-332-15 |
| 415-332-25Q | for 0.078″ – 3/32″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-332-25 |
QUICK LOAD Liner Retainers
Required for initial installation only (sold separately)
| 415-24* | for 0.078″ – 3/32″ wire |
| 415-26* | for 0.030″ – 5/64″ wire |
| 415-37** | for 0.030″ – 5/64″ wire |
**Compatible with most Tweco® MIG guns