TOUGH GUN TA3 Robotic Air-Cooled MIG Guns
Maximize Throughput. Minimize Costs.
Designed with our unique and durable low-stress robotic (LSR+) unicable, TOUGH GUN® TA3 robotic air-cooled MIG guns feed through the robot arm and provide outstanding precision and reliability.
The TOUGH GUN TA3 MIG gun combines the most valuable product options from our legacy TOUGH GUN ThruArm G1 and G2 series platforms, plus new features that provide increased durability.
- Re-engineered neck clamp improves durability and consistency of clamping force
- Additional standard neck options
- Expands the range of tool center point options and variety of working envelopes
- Reduces costs and lead times for necks that were previously specials
- Compatible with legacy product
- Compatible with existing TOUGH GUN® ThruArm® G1 series air-cooled necks, power pins and consumables
- Replacement for TOUGH GUN ThruArm G1 series
- Gun part numbers are unaffected by these changes
- New black gun body simplifies identification of upgraded vs. legacy guns
- Features a precision-engineered keyway system for accurate alignment and quick replacement
- Available as a complete package – from the power pin to the contact tip – for ABB®, KUKA®, Motoman®, OTC Daihen®, Panasonic®, COMAU®, Kawasaki® and FANUC® robots
- Clutch and solid mount options available for select models
- Wire brake, air blast and TOUGH GUN I.C.E.® technology are available options for select models
Processes
- MIG (GMAW) welding
Duty Cycle Rating
- 100%: 350 amp with mixed gases
Gun performance unchanged. Ratings are based on tests that comply with the new 2013 IEC 60974-7 standards.
Configurations Available for
- ABB®, FANUC®, Motoman® and Panasonic® with standard lead time
- COMAU®, Kawasaki®, KUKA®, OTC Daihen® and Nachi® are available but subject to a 10-15 day lead time
Customize your TOUGH GUN TA3 robotic air-cooled MIG gun online
Now you can get access to additional resources and an expanded replacement parts list with diagram when you configure the gun part number you need or reverse lookup your existing gun part number.
This new mobile-friendly online configurator provides downloadable exploded view diagrams and other valuable takeaways that you can print, save in PDF format, or share via email.
Consumables Systems
MIG Gun Liners
Consumables Systems
MIG Gun Liners
TOUGH GUN® TT3 Reamer
The TOUGH GUN TT3 reamer robotic nozzle cleaning station — now available in both analog and Ethernet models — is TOUGH on spatter and operates reliably in even the harshest welding environments. Automating spatter removal will help to extend the life of your robotic MIG guns and consumables, benefiting both your bottom line and your production uptime and throughput. Learn more about the TOUGH GUN TT3 reamer or the TOUGH GUN TT3E reamer.
TOUGH GARD® Anti-Spatter Multi-Feed System
Interested in the ultimate solution to refilling the reservoirs on your nozzle cleaning stations? Feed up to 10 TOUGH GUN Reamer units from a single 5-gallon or 55-gallon drum of TOUGH GARD anti-spatter liquid with the TOUGH GARD multi-feed system. Find out more.
TOUGH GARD Anti-Spatter Liquid
This ready-to-use water-soluble, non-toxic product creates a sacrificial surface that reduces spatter adhesion, and unlike oil-based anti-spatter solutions, won’t clog the sprayer. This prolongs the life of your consumables and minimizes downtime due to nozzle cleaning, which can help reduce your operating and maintenance costs. Learn more.
Neck Checking Fixture
The TOUGH GUN neck checking fixture allows you to verify and re-master your tool center point (TCP). In the event of a collision, this fixture can be used to realign the neck. Click here for additional information.