Stay up-to-date with our latest product news!
Check in regularly or subscribe to stay up-to-date on the latest Bernard® and Tregaskiss® product updates, improvements, discontinuations and new product information.
Search our Tech Connection Product News only
- DISCONTINUED PRODUCTS — Various Part NumbersVarious Part Numbers October 23, 2020 Effective December 31, 2020, we will be discontinuing a variety of part numbers due to low demand and sales volume. A majority of these items are configured MIG gun part numbers and special products. Please refer to the appendix for the list of affected part numbers.
- PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R Consumables
September 23, 2020 We are proud to announce new AccuLock R consumables are now available for Tregaskiss 600 amp robotic water-cooled MIG guns. Convert your existing gun from TOUGH LOCK® to AccuLock R consumables with no impact to Tool Center Point (TCP), or configure your new Tregaskiss 600 amp robotic water-cooled MIG gun with AccuLock […] - PACKAGING CHANGE — Formatting Changes to Owner’s ManualsFormatting Changes to Owner’s Manuals August 18, 2020 Customers may notice that some Tregaskiss® and Bernard® MIG welding product owner’s manuals look different than previous versions. This is because we recently refreshed the design and format of these product manuals, but their contents remain the same. No changes to the important installation, maintenance, troubleshooting, parts […]
- NEW PRODUCT – Expanded AccuLock™ S Power Pin Offering
August 11, 2020 We are pleased to announce that the AccuLock S consumables system has been expanded to include new Lincoln®, Tweco® #4 and Tweco® #5 AccuLock S power pins. These three new power pins are also configurable options in our online BTB MIG gun configurator. Lincoln®Tweco® #4Tweco® #5 Part Numbers Feeder ManufacturerAccuLock S Power PinAccuLock […] - PRODUCT CHANGE — Changes to Crimping on Select NozzlesAugust 4, 2020 Effective immediately, you may notice a slight change to the crimp area of some Tregaskiss® nozzles. Within our manufacturing process, we have begun to transition from six-jaw to eight-jaw crimpers. Rest assured that the durability and performance of Tregaskiss nozzles will remain the same. The only difference you will notice is a […]
- NEW PRODUCT – Tregaskiss Nozzles for AccuLock R Consumables
April 3, 2020 Tregaskiss is proud to announce the addition of two new nozzles to the AccuLock™ R consumables offering. Only slightly larger than 1/2″ bore nozzles, these 5/8″ bore nozzles offer almost the same weld access while still providing the clearance needed for reliable gas flow and reaming to the gas holes. Part Numbers […] - PACKAGING CHANGE – Changes to Tregaskiss and Bernard Nozzle Bag Packaging
February 14, 2020 Tregaskiss® and Bernard® branded nozzles are currently packaged in a variety of bag sizes and styles. We will begin standardizing on a single size and style bag for all Tregaskiss and Bernard nozzles over the coming months as a running change that takes place as existing inventory is depleted. Current Bag Sizes […] - NEW PRODUCT – AccuLock R Consumables
October 23, 2019 Tregaskiss is pleased to announce the launch of new AccuLock™ R consumables, a system designed to maximize throughput and efficiency with minimal risk and effort. AccuLock contact tips last longer and are virtually impossible to cross-thread. The long contact tip tail concentrically aligns the tip within the diffuser prior to thread engagement, […] - PRODUCT CHANGE – AccuLock S Power Pins for Miller Equipment
August 20, 2019 Effective immediately, a new, enhanced AccuLock™ S power pin is now available for Miller® equipment. This new power pin is designed specifically for use with the new Bernard® AccuLock S consumable system to optimize performance. CONVENTIONAL (Shown Left) Miller® Power Pin Design If your power pin has a large ID, please contact […] - NEW PRODUCT – Conversion Diffusers for TOUGH LOCK Contact Tips
August 8, 2019 Tregaskiss is proud to announce that we have launched the following new conversion diffusers that receive TOUGH LOCK® contact tips, including HDP: Conversion Diffuser Description 404-72 Fronius® TPS 400i Accepts TOUGH LOCK contact tipsRequires Fronius nozzle and insulatorCompatible with reamer blade part number RCT-21 404-73 Lincoln® Magnum Pro® (Slip-On) Accepts TOUGH LOCK […] - DISCONTINUED PRODUCT – SURESTART Contact Tips
Tregaskiss SURESTART Contact Tips June 18, 2019 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, this is a notification that we are discontinuing Tregaskiss® SURESTART™ contact tips, due to low demand. Effective immediately: All SURESTART contact […] - DISCONTINUED PRODUCT – Select NozzlesJanuary 25, 2019 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, due to low demand, select Tregaskiss® nozzles will be discontinued. Effective March 1, 2019, all nozzles listed in the chart below will be discontinued […]
- NEW PRODUCT – AccuLock S Consumables
November 1, 2018 Bernard is proud to introduce new AccuLock™ S consumables, a system designed to address liner trim length errors and erratic wire feeding. Important Note: Most components of the AccuLock S consumables family are currently available. The complete offering will be coming soon. The AccuLock S liner is locked and concentrically aligned to […] - PACKAGING CHANGE – Changes to Bag Packaging
November 1, 2018 Customers may notice that some Bernard® parts and consumables are arriving in different bags. We transitioned to a newly designed Bernard branded white bag design. In addition to changing the artwork layout and color of the bags, the overall usability has also been improved. These new white bags offer a clear window […] - PACKAGING CHANGE – Changes to Bag Packaging
November 1, 2018 Customers may notice that some Tregaskiss® parts and consumables are arriving in different bags. We transitioned from a black bag design to a white bag design. This new white bag design has a clear window on the back side of the bag to help make visual product identification easier, and the durability […] - PRODUCT UPDATE – New Liner Trim Length for Liners 6-Feet Long and ShorterFebruary 3, 2017 Tregaskiss now recommends trimming all rear-loading conventional and front-loading QUICK LOAD® liners that are 6-feet in length and shorter with a 1/2-inch stick out. This new trim length provides performance improvements for the liner and cable, and for wire feeding overall. It also helps to reduce some strain on both the liner […]
- PRODUCT IMPROVEMENT – Changes to Heavy Duty (HD) Nozzle Crimping
January 16, 2015 Old crimp (shown left) New crimp (shown right) Tregaskiss has improved the crimp on our heavy duty (HD) nozzle offering. The profile on the crimping dies that form the ring crimp has been narrowed from a pad length of 0.450″ to a pad length of 0.390″ (see image below). This change significantly […] - PRODUCT IMPROVEMENT – Bernard Conventional Liners
Bernard has implemented a material change to all Bernard conventional liners. All liners were previously produced from high carbon music wire. All liners will now be produced from high carbon music wire with tin zinc plated coating. Liners are still available in lengths of up to 25 feet (7.6 m) for various wire sizes. Part […] - NEW PRODUCT – Bernard Conventional Liners
Compatible with BTB Semi-Automatic MIG Guns and Legacy Q-Gun, S-Gun, & T-Gun Series MIG Guns Launched on June 2, 2014, the new Bernard® conventional liners are compatible with all legacy Q-Gun™, S-Gun™ and T-Gun™ MIG guns and all BTB platform guns, which allows you to simplify and reduce your inventory. The image to the right […] - NEW PRODUCT – Bernard Quik Tip HD Series ConsumablesDesigned for shipbuilding, trailer fabrication and other heavy equipment manufacturing operations. Increased wall thickness and insulating material reduces number of changeovers caused by heat degradationRemoveable nozzle cone lowers downtime and consumables cost by allowing operators to replace only the cone, the most frequently damaged part of the nozzle, without removing and replacing the entire nozzle […]
- NEW PRODUCT – QUICK LOAD Liner AutoLength System
November 12, 2012 The QUICK LOAD® liner AutoLength™ system from Tregaskiss is designed specifically to minimize downtime, wire feeding and quality issues commonly associated with the liner being cut to an incorrect length. Short liners are a common root cause of poor wire feeding. Further, a short liner does not have a chance of properly […] - NEW PRODUCT – Nozzle Insulator for 600 amp Robotic Water-Cooled MIG Gun
May 22, 2009 This optional insulator for the 601 series water-cooled nozzle is now made of high-temperature Teflon material rather than ceramic. This new design is shorter than the previous ceramic version, but outperforms the previous design since it uses a more durable material. This optional nozzle insulator is available as a separate item: Part #601-5-75-4 - NEW PRODUCT – Thread-On Nozzle System
May 22, 2009 Thread-on nozzle system features a TOUGH LOCK® retaining head This thread-on nozzle system features a TOUGH LOCK® retaining head with an external thread and a tapered seat. Nozzles thread onto the retaining head, preventing damage to copper threads and prolonging the life of the neckTapered seat provides a locking action similar to […] - NEW PRODUCT – TOUGH LOCK EHD Contact Tips
May 22, 2009 TOUGH LOCK® extra heavy duty (EHD) contact tips (603-20 series) are ideal for large wire sizes, 7/64″ and 1/8″ for example, that can’t be handled with the TOUGH LOCK heavy duty (HD) contact tip series. - NEW PRODUCT – TOUGH LOCK Adaptor for Tweco-Style Robotic Necks
January 29, 2009 This adaptor is designed to allow the use of TOUGH LOCK® consumables on Tweco®-style air-cooled robotic necks without changing the original tool center point (TCP). Part Numbers and Descriptions 404-63 — Adaptor for Tweco-style air-cooled robotic necks (packages of 10)402-19 — Neck insulator for use with 404-63 (packages of 10) - PRODUCT IMPROVEMENT – Miller Quick-Connect Block
January 29, 2009 Newly designed, this Miller® quick-connect block (adaptor) receives a 214-1 Miller power pin and assembles into feeders that are compatible with OTC®, Tweco® #4, and Tweco #5 power pins. Part Number: 417-63 - NEW PRODUCT – TOUGH LOCK EXHD Contact Tips
September 19, 2008 Due to popular demand, Tregaskiss now offers a TOUGH LOCK® extended life heavy duty (EXHD) contact tip. These contact tips are available in packs of 100 (part #403-27-116). - NEW PRODUCT – Cloos Power Pin
June 8, 2009 Tregaskiss is pleased to offer a new power pin connection for Cloos® SZ-style wire feeders. This is a complete connection (similar to our Euro style MIG guns) which can be ordered on Tregaskiss® TOUGH GUN® robotic and automatic MIG guns and Bernard® T-Gun™ semi-automatic MIG guns (formerly Tregaskiss TOUGH GUN semi-automatic MIG […] - NEW PRODUCT – Fronius Power Pin
Tregaskiss Power Pin for Fronius VR1500 Wire Feeders July 1, 2009 Tregaskiss has designed a power pin (part #214-41) that can be used in place of the actual Fronius® Power Pin for the VR15000 wire feeder. This new power pin is compatible with Tregaskiss TOUGH GUN® robotic and automatic MIG guns and Bernard® T-Gun™ semi-automatic […] - PRODUCT IMPROVEMENT – Quick-Connect Blocks
September 29, 2009 Tregaskiss has made a change to its quick-connect blocks 417, 417-50, 417-60 and 417-63. The brass fitting on the end of the gas hose (as shown in the 417-63 Miller® quick-connect block image to the right) has been removed from these quick-connect blocks. Affected Part Numbers and Descriptions 417 — Quick Connect Block […] - PRODUCT CHANGE – Tregaskiss Bags and Roll Marks
November 26, 2009 Customers may notice that some Tregaskiss® parts and consumables are arriving in different bags. We transitioned from the white bag design branded with the TOUGH GUN® name to a black bag design with the Tregaskiss brand name. In addition to changing the branding and color of the bags, the overall usability has […] - PRODUCT UPDATE – New QUICK LOAD Liner Wire Sizes
July 14, 2010 Tregaskiss has expanded its QUICK LOAD® liner offering ot include three new wire sizes for 0.030″, 1/16″ to 5/64″, and 0.078″ to 3/32″ wires. QUICK LOAD liners consist of a two-piece system that requires less than half the time and effort for replacement compared to conventional MIG gun liners, and they also ease routine […]
- DISCONTINUED PRODUCTS — Various Part NumbersVarious Part Numbers October 23, 2020 Effective December 31, 2020, we will be discontinuing a variety of part numbers due to low demand and sales volume. A majority of these items are configured MIG gun part numbers and special products. Please refer to the appendix for the list of affected part numbers.
- PACKAGING CHANGE — Formatting Changes to Owner’s ManualsFormatting Changes to Owner’s Manuals August 18, 2020 Customers may notice that some Tregaskiss® and Bernard® MIG welding product owner’s manuals look different than previous versions. This is because we recently refreshed the design and format of these product manuals, but their contents remain the same. No changes to the important installation, maintenance, troubleshooting, parts […]
- DISCONTINUED PRODUCT – BTB MIG Gun 500 amp B Series Handle OptionAugust 1, 2019 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus and opportunities to innovate our product portfolio. Accordingly, due to low demand, we are discontinuing the 500 amp B Series Handle option from our BTB MIG gun offering. Effective August 16, 2019, the following part […]
- DISCONTINUED PRODUCT – Legacy F-Gun MIG Guns and Service PartsJanuary 8, 2019 Our product offering is regularly assessed to ensure focus on customer needs and opportunities to innovate our product portfolio, so we can continue to deliver sustainable value to our customers. Accordingly, due to low demand, the following products will be discontinued: Legacy F-Gun™ MIG Guns Effective January 8, 2019, all legacy F-Gun […]
- PRODUCT UPDATE – Changes to the Bernard Fume Extraction MIG Gun Offering
March 9, 2018 We are proud to announce that effective immediately, you will notice some important changes to the Bernard® fume extraction MIG gun offering. Bernard FILTAIR™ fume extraction MIG guns are transitioning under the Clean Air™ brand name and will become our Bernard® Clean Air™ curved handle series fume extraction MIG guns. This product […] - DISCONTINUED PRODUCT – 8 and 12 foot BTB MIG Gun Lengths
November 30, 2017 Effective immediately, all 8- and 12-foot length options in the BTB semi-automatic air-cooled MIG gun product lineup will be discontinued. BTB MIG guns will continue to be available in lengths of 10-, 15-, 20- and 25-feet. No other configurable options have been affected by this change. View available options or configure a […] - PRODUCT UPDATE – 300 amp Clean Air Fume Extraction MIG Gun Now AvailableMarch 16, 2017 Bernard is pleased to announce that we have added a 300 amp model to our Clean Air™ fume extraction MIG gun offering. Reduce smoke at the source with an industrial-duty fume extraction gun that is comparable in size and weight to a regular welding gun. Features and Benefits NEW!! Available in 300 […]
- PRODUCT UPDATE – Clean Air Gun Vacuum Tube and Chamber Finish Change
December 16, 2016 Bernard has changed the finish on all Clean Air™ fume extraction gun vacuum tubes and chambers from chrome to black. Effective immediately, all new guns, replacement vacuum tubes and replacement chambers will have the new darker finish. This change is purely aesthetic, and has no impact on performance, part numbering or price. […] - NEW PRODUCT – C Series Handle Option for BTB MIG Guns
New C Series Straight Handle The new C series straight handle expands our handle offering from six to seven options within our Bernard BTB MIG gun configurator. This new handle provides all the same benefits as our current T series straight handle, plus additional enhancements such as comfortable handle overmolding and an ergonomic rear swivel. […] - PRODUCT IMPROVEMENT – Trigger Control Plug Housing
November 23, 2015 Bernard has redesigned the trigger control plug housing on located on the rear strain relief as well as the trigger control plug connection on BTB MIG guns. This change provides an internal connection which is more durable and also allows the strain relief to fit more easily into various feeders from major […] - DISCONTINUED PRODUCT – Roughneck MIG Guns
Effective April 30, 2015 Miller Electric Mfg. Co. discontinued the Roughneck® C-Series MIG gun series and replaced them with Bernard® BTB semi-automatic air-cooled MIG guns. Miller Electric will continue to offer consumables and replacement parts for the Roughneck C-Series MIG guns. Please see the cross reference chart below to find the replacement Bernard BTB MIG […] - DISCONTINUED PRODUCT – Manual ProductsAs of August 4, 2014, the manual product line (cable connectors, lugs and splicers) from Bernard has been discontinued. Bernard has transitioned these products to a new supplier! Customers can contact Hopkin Manufacturing directly to place orders for these products. Hopkin Manufacturing: +1-800-524-1458 | hopkinsmfg.com
- NEW PRODUCT – Bernard Clean Air Fume Extraction Gun
New Clean Air™ Fume Extraction Series Reduce smoke at the source with an industrial-duty fume extraction gun that is comparable in size and weight to a regular welding gun. Small size of vacuum chamber provides good joint access and visibilityVacuum hose swivel on rear of handle improves flexibility and reduces wrist fatigueIdeal fume extraction solution […] - PRODUCT UPDATE – Neck Insulators for BTB MIG Guns
Although no new neck insulators are being introduced due to implementation of the BTB semi-automatic air-cooled MIG gun platform on June 2, 2014, users should be aware that neck insulator replacement for these guns will be based on several variables including: Your gun’s amperage;Your gun’s neck / handle combination;The consumables series that you are using. […] - PRODUCT UPDATE – Common Straight Rear Strain Relief for BTB MIG Guns
New BTB platform MIG guns, launching on June 2, 2014, will feature a common straight rear strain relief (shown right) on almost all configurations. This straight rear strain relief was originally introduced on Tregaskiss TOUGH GUN semi-automatic MIG guns and allows expansion or maintenance of several key features: Allows the QUICK LOAD® liner and QUICK […] - PRODUCT IMPROVEMENT – Dual Thread Necks for BTB MIG Guns
Beginning on June 2, 2014, Bernard’s new BTB MIG gun platform brings our Q-Gun™, S-Gun™ and T-Gun™ semi-automatic air-cooled MIG guns into a single gun line and single configurator. As a part of this launch, all fixed and rotatable necks offered through the new BTB MIG gun configurator will now feature a dual thread that […] - PRODUCT CHANGE – Bernard Power Pins
Beginning on June 2, 2014, Bernard’s new BTB MIG gun platform brings our Q-Gun™, S-Gun™ and T-Gun™ MIG Guns into a single gun line and single configurator. To combine the gun lines, it was necessary to standardize the back ends of all BTB MIG guns with the straight rear strain relief found on Bernard® T-Gun™ […] - PRODUCT UPDATE – New Handle Names for the BTB MIG Gun Platform
Beginning on June 2, 2014, Bernard’s new Best of the Best Platform brings our Q-Gun™, S-Gun™ and T-Gun™ semi-automatic air-cooled MIG guns into a single gun line and single configurator. Since we now have six gun handle styles within a single configurator, we have developed the following naming scheme for our handles per the chart […] - PRODUCT IMPROVEMENT – Q-Nut for BTB MIG Guns
Along with the new Bernard® semi-automatic MIG guns BTB platform launching on June 2, 2014, Bernard is pleased to announce the launch of the improved Q-Nut used on all Bernard rotatable necks. It has been completely redesigned to offer a significant increase in durability. Please note that the new silicone ring, Q-Nut cover and silicone […] - SYSTEM UPDATE – New Gun Part Numbers for BTB MIG GunsAll Bernard Semi-Automatic Air-Cooled MIG Guns under the new BTB Platform will have new part numbering as of June 2, 2014. Former Q-Gun™ and S-Gun™ MIG guns will require an additional character added to the end of the existing part numbers to allow for new liner selection options. Former T-Gun™ semi-automatic air-cooled MIG guns will […]
- PRODUCT UPDATE – New Internal Stop in Centerfire and Quik Tip Diffusers
We have added internal stops to all Centerfire™ and Quik Tip™ diffusers to improve alignment between the liner and contact tip for enhanced wire feedability. This product improvement is being implemented as a running change. What’s Changed? The new internal stop inside Centerfire and Quik Tip diffusers prevents the liner from going all the way […] - PRODUCT IMPROVEMENT – New Swivel Design on the Bernard FILTAIR Fume Extraction GunThe improved swivel design on the Bernard® FILTAIR™ fume extraction MIG gun now uses threads to retain the vacuum hose and eliminates the front band-it clamp from both amperage models. This redesign will improve performance and avoids replacing the hose clamp with a larger head. What Changed? The new design threads into the vacuum hose […]
- NEW PRODUCT – Bernard 250 amp S-Gun MIG Gun
NEW! Ideal for shipbuilding and construction industries to reduce downtime and increase productivity! NEW! Locked rotatable neck eliminates downtime at start of shift due to missing necks resulting in reduced operator costsLocked rotatable neck is easily serviceable by maintenanceSteel monocoil power cable is composed of lightweight steel coils that provide exceptional conduit for shielding gas […] - NEW PRODUCT – Bernard FILTAIR Fume Extraction MIG Gun
Keeping a clean working environment is important. That’s why Bernard engineered the FILTAIR™ fume extraction gun. Get right to the source and extract fumes at the weld bead with this new gun! Vacuum regulator on front of handle allows balance of suction with shielding gas flow to protect against porositySmaller, light weight handle improves maneuverability […] - NEW PRODUCT – Dura-Flux Self-Shielded Flux Cored Gun with Replaceable Cable Liner
NEW! Built to meet the needs of harsh and demanding environments, Bernard introduces the Dura-Flux™ Gun with replaceable power cable liner that is extremely durable yet comfortable to hold and use. New replaceable power cable liner allows for quick and easy power cable maintenanceOptional dual schedule switch for wire speed adjustment while welding is integrated […] - PRODUCT IMPROVEMENT – New 211-5-8 Extended Lever Switch
An improved switch design for Bernard® T-Gun™ MIG guns (formerly Tregaskiss® TOUGH GUN® semi-automatic MIG guns) is now available to improve the performance and the life of the extended lever switch over previous versions. What Changed? The switch casing design has been updated to allow for improved retention tabs between two switch halves, which also […] - PRODUCT IMPROVEMENT – New 211-5 Switch
This improved switch design will significantly improve the performance and the life of the switch over previous versions. The new 211-5 switch became standard on all Bernard® TGX® XS and T-Gun™ semi-automatic compact series MIG guns (formerly Tregaskiss® semi-automatic MIG guns) on March 1, 2011. What Changed? The switch casing design has been updated to […] - PRODUCT UPDATE – Trigger Lock 411-500As of March 13, 2011, the electronic trigger lock (Part Number 411-500) for Bernard® T-Gun™ series MIG guns (formerly Tregaskiss® TOUGH GUN® semi-automatic MIG guns) is no longer available. It has been REPLACED with Part Number 411-4. Affected Part Numbers DISCONTINUED: 411-500REPLACEMENT: 411-4
- PRODUCT IMPROVEMENT – LSR+ Unicables
October 11, 2022 For use with TOUGH GUN® TA3 ThruArm® series robotic MIG guns, LSR+ (Low-Stress Robotic) unicables incorporate new SmoothTurn™ technology to maximize production uptime. Conventional style unicables typically come with a connection that limits rotational capabilities and produces torsional stress in the cable. Unlike conventional unicables, the LSR+ incorporates a rotating power connection […] - DISCONTINUED PRODUCTS — Various Part NumbersVarious Part Numbers October 23, 2020 Effective December 31, 2020, we will be discontinuing a variety of part numbers due to low demand and sales volume. A majority of these items are configured MIG gun part numbers and special products. Please refer to the appendix for the list of affected part numbers.
- PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R ConsumablesSeptember 23, 2020 We are proud to announce new AccuLock R consumables are now available for Tregaskiss 600 amp robotic water-cooled MIG guns. Convert your existing gun from TOUGH LOCK® to AccuLock R consumables with no impact to Tool Center Point (TCP), or configure your new Tregaskiss 600 amp robotic water-cooled MIG gun with AccuLock […]
- PRODUCT UPDATE — Tregaskiss Fixed Automatic Series MIG Guns
September 23, 2020 AccuLock R Consumables Tregaskiss is pleased to announce updates to our fixed automatic series MIG guns: Now available with AccuLock R consumables AccuLock™ R consumables are designed for increased tip life, and virtually eliminate contact tip cross-threading issues to help reduce both your planned and unplanned downtime. New Online Configurators and Reverse […] - PACKAGING CHANGE — Formatting Changes to Owner’s ManualsFormatting Changes to Owner’s Manuals August 18, 2020 Customers may notice that some Tregaskiss® and Bernard® MIG welding product owner’s manuals look different than previous versions. This is because we recently refreshed the design and format of these product manuals, but their contents remain the same. No changes to the important installation, maintenance, troubleshooting, parts […]
- DISCONTINUED PRODUCTS — ACA and ACB Series Automatic Air-Cooled MIG GunsACA and ACB Series Automatic Air-Cooled MIG Guns August 12, 2020 Tregaskiss will discontinue the sales of ACA and ACB series automatic air-cooled MIG guns (formerly branded Bernard®) and parts as of January 31, 2021. Click here for a list of affected part numbers Replacement Gun Option Tregaskiss® Auto Head Fixed Automatic Air-Cooled MIG Guns are […]
- DISCONTINUED PRODUCT – TOUGH GUN G2 and ThruArm G2 Series MIG Guns
December 1, 2017 As of December 29, 2017, all TOUGH GUN® G2 and ThruArm® G2 series robotic air-cooled MIG guns will be discontinued as they are being replaced by TOUGH GUN CA3 and TOUGH GUN TA3 robotic air-cooled MIG guns. The TOUGH GUN G2 and ThruArm G2 series product lines will be fully supported with […] - DISCONTINUED PRODUCT – Tregaskiss by DINSE Robotic Water-Cooled MIG GunsNovember 11, 2019 In September 2017, Tregaskiss entered into a Master Distribution Agreement with DINSE GmbH to provide best-in-class robotic water-cooled MIG guns to the North American market under the Tregaskiss® by DINSE™ brand name. After many discussions between Tregaskiss and DINSE, we have made an amicable and mutual decision to end our business relationship. […]
- PRODUCT UPDATE – Firmware and Software Update for the TOUGH GUN TT3E ReamerDecember 2, 2019 Effective November 15, 2019, the TOUGH GUN® TT3E (Ethernet) reamer is now running updated firmware and software. The ARGEE software has been updated from version 4.0 to 4.1, and the firmware from version 3.5 to 3.6. What’s New? Firmware: Allows the Turck ARGEE 4.1 software to be loaded through the Turck Service […]
- PACKAGING CHANGE – 5-Gallon TOUGH GARD Anti-Spatter Liquid Pail
July 1, 2018 Tregaskiss has made changes to its 5-Gallon (18.9 L) TOUGH GARD® anti-spatter liquid pail design for increased strength and durability. Designed with a heavy duty integrated handle, this new container is easier to handle and can be easily stacked for maximized storage space. The new design also offers an improved seal to […] - PRODUCT CHANGE – TOUGH GUN Reamer Cutter Blades
July 30, 2019 Tregaskiss has made the following changes to its TOUGH GUN® reamer cutter blades: Effective immediately as a running change: With no affect on performance, all cutter blades will now have a black oxide coating to ensure color consistency.Effective August 1, 2019: Select cutter blades have been changed from a dual flute design […] - DISCONTINUED PRODUCT – Tandem Robotic TorchesSeptember 12, 2018 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, due to low demand, the following products will be discontinued: Tandem Robotic MIG Guns Effective September 30, 2018, all standard and special Tandem MIG […]
- DISCONTINUED PRODUCT – Service Parts for Quick-Change and Keyed Robotic Water-Cooled GunsSeptember 12, 2018 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, due to low demand, the following products will be discontinued: Service Parts for Discontinued Quick-Change Water-Cooled and Keyed Water-Cooled Robotic MIG Guns Effective December […]
- PRODUCT UPDATE – Expanded TOUGH GUN TA3 MIG Gun Offering
August 10, 2018 Tregaskiss is pleased to announce that the TOUGH GUN® TA3 robotic air-cooled MIG gun offering has now been expanded to include configurations for the following robot models: FANUC® 100iDKUKA® KR6 R1820HW, KR8 R1420HW, KR8 R1620HW and KR8 R2100HWYaskawa® Motoman® AR1440, AR1720 and AR2100 Available Resources Download the Spec Sheet (PDF)Download the Owner’s […] - PRODUCT UPDATE – TOUGH GUN TA3 MIG Gun Offering Available for FANUC 100iD
July 19, 2018 Tregaskiss is pleased to announce that the TOUGH GUN® TA3 robotic air-cooled MIG gun offering has now been expanded to include configurations for the FANUC® 100iD robot model. Features & Benefits Quick and easy cable replacement – easily access the cable clamping bolt by removing one half of the torch cover (Figure […] - DISCONTINUED PRODUCT – All TOUGH GUN G2 and ThruArm G2 Series Replacement PartsNovember 20, 2019 Effective November 29, 2019: All replacement parts for the previously discontinued TOUGH GUN® G2 and ThruArm G2 series robotic air-cooled product will be discontinued and no longer available for sale. Visit the TOUGH GUN CA3 or TOUGH GUN TA3 robotic air-cooled MIG gun page to learn more about replacement solutions. Affected Part […]
- DISCONTINUED PRODUCT – Legacy TOUGH GUN ThruArm Product for ABB IRB1600ID
July 24, 2017 As of December 31, 2017, legacy TOUGH GUN® ThruArm® G1 series product for ABB® IRB1600ID configurations will be discontinued, and effective immediately, lead time for part number 508-200ABB will be 15 days. 508-200ABBW508-200ABB508-200ABB-658SA004 Our legacy TOUGH GUN ThruArm G1 series was replaced by our TOUGH GUN TA3 series in 2014, but although […] - PRODUCT IMPROVEMENT – Nozzle Detection Option for TOUGH GUN TT3 and TT3E ReamerApril 28, 2017 An improvement has been made to the nozzle detect option for our TOUGH GUN® TT3 reamer. This same option is also now available on our TOUGH GUN TT3E reamer. This new nozzle detect uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream […]
- PRODUCT UPDATE – TOUGH GUN TT3 Reamer Upgrades
April 28, 2017 Upgrades have been made to the TOUGH GUN® TT3 reamer to allow for a more common design between this model and the TOUGH GUN TT3E reamer. These upgrades include a common frame, replacement of the terminal strip with a new wiring harness, easy access setup switches, and a new check valve. Terminal […] - PRODUCT IMPROVEMENT – New TOUGH GUN TT3 Reamer Check Valve
April 15, 2017 The check valve on the TOUGH GUN® TT3 and TT3E reamer robotic nozzle cleaning stations have been upgraded to a more robust and durable design. The new check valve is now common between both the analog and the Ethernet model. Important Notes: The new check valve will keep the same part number […] - PRODUCT UPDATE – TOUGH GUN TA3 Torch Solutions for Yaskawa Motoman Robots
December 18, 2019 Overview Tregaskiss manufactures TOUGH GUN® TA3 through-arm welding torches for many Yaskawa® Motoman® robot models including but not limited to: Current models: AR/MA1440, MH12, AR/MA2010, AR/MA3120, AR1730, MH24Legacy models: MA/EA1400, MA/EA1900, MA3100 On the current robot models listed above, the spacers and through-arm cables on a Tregaskiss® gun may originate from either […] - PRODUCT UPDATE – Replacement Parts Availability for the TOUGH GARD Spatter CleanerJune 27, 2016 The TOUGH GARD® spatter cleaner was discontinued on December 31, 2014. Some replacement parts for this discontinued product continue to be available. Prices and availability of these replacement parts are subject to change without notice. Discontinued Replacement Parts Part NumberDescriptionPER-2510Motor Available Replacement Parts Part NumberDescriptionER-2241Control ValveER-2242Sprayer ValveER-2560Reed SwitchER-2609Wiring Interface ReceptacleER-2700Spatter Cleaner PneumaticER-500-15Spray […]
- PRODUCT UPDATE – TOUGH GUN TA3 MIG Gun Offering Available for Panasonic TM-2000
June 8, 2016 Tregaskiss is pleased to announce that the TOUGH GUN® TA3 robotic air-cooled MIG gun offering has now been expanded to include configurations for the Panasonic® TM-2000 robot model. Available Resources Download the Spec Sheet (PDF)Download the Owner’s Manual (PDF)Download the Owner’s Manual for FANUC Robots (PDF)Configure your TOUGH GUN TA3 MIG Gun […] - DISCONTINUED PRODUCT – PER-2510 Motor
PER-2510 Air Motor for the TOUGH GARD Spatter Cleaner June 6, 2016 Effective immediately, the PER-2510 air motor for the discontinued TOUGH GARD® spatter cleaner is no longer available through Tregaskiss. As a result, the PER-2599 kit will no longer include the PER-2510 air motor (please see revised PER-2599 kit parts breakdown below). This Fiam® […] - NEW PRODUCT – TOUGH GUN Reamer Stand
Tregaskiss proudly announces its new TOUGH GUN® reamer stand. This simple fixed height durable stand is compatible with all TOUGH GUN TT3 and TT3E reamer models and can be ordered to a custom height between 18 and 45 inches. This new simplified design also allows for quick installation and new lower pricing. Click here to […] - NEW PRODUCT – TOUGH GUN TT3E Reamer
March 26, 2016 Tregaskiss is pleased to announce the new TOUGH GUN® TT3E reamer robotic nozzle cleaning station offering the same high levels of durability, serviceability and repeatability now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. Enjoy greater control optimization, remote monitoring capability, […] - PRODUCT UPDATE – Expanded TOUGH GUN TA3 MIG Gun Offering
July 8, 2015 Tregaskiss is pleased to announce that the TOUGH GUN® TA3 robotic air-cooled MIG gun offering has been expanded to include configurations for FANUC® M710iC-12L and Kawasaki® BA006N robot models. Available Resources Download the Spec Sheet (PDF)Download the Owner’s Manual (PDF)Download the Owner’s Manual for FANUC Robots (PDF)Configure your TOUGH GUN TA3 MIG […] - PRODUCT UPDATE – Spray Containment
June 23, 2015 A perfect addition to the TOUGH GUN TT3 Reamer This innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin, improving the air quality of the working environment and maintaining the cleanliness of the weld cell. Spray Containment Part Numbers TS-1000-01for use with Tregaskiss® […] - DISCONTINUED PRODUCT – TOUGH GARD Spatter Cleaner Robotic Nozzle Cleaning Station
TOUGH GARD Spatter Cleaner Robotic Nozzle Cleaning Station December 31, 2014 The TOUGH GARD® spatter cleaner has been discontinued as of December 31, 2014. Replacement parts will continue to be available until December 31, 2015. Prices and availability of these replacement parts are subject to change without notice. Consider an upgrade to the TOUGH GUN® […] - NEW PRODUCT – TOUGH GUN TA3 Robotic Air-Cooled MIG GunOctober 31, 2014 Tregaskiss is pleased to bring you the TOUGH GUN® TA3 robotic air-cooled MIG gun. Designed for today’s through-arm style robots, the TOUGH GUN TA3 robotic air-cooled MIG gun combines the most valuable options of our TOUGH GUN ThruArm™ G1 and G2 series platforms – including our low-stress robotic (LSR) unicable – along […]
- NEW PRODUCT – TOUGH GUN CA3 Robotic Air-Cooled MIG Gun
October 31, 2014 Tregaskiss is pleased to bring you the TOUGH GUN® CA3 robotic air-cooled MIG gun. Designed for high-volume production environments, the TOUGH GUN CA3 robotic air-cooled MIG gun combines the most valuable product features of our TOUGH GUN G1 and G2 series platforms, along with performance improvements in our unicable technology that extends […] - PRODUCT IMPROVEMENT – Electronic Check Valve and Mounting Bracket Added to the TOUGH GUN TT3 Reamer
August 11, 2014 An electronic check valve and mounting bracket have been added to the TOUGH GUN® TT3 reamer. This improvement provides added protection against leakage from the sprayer reservoir. Since this addition affects the wiring slightly, updated wiring diagram instructions are provided with every affected unit. A TOUGH GUN TT3 reamer sprayer valve retrofit […] - PRODUCT IMPROVEMENT – Tregaskiss Cutter Blades
June 1, 2013 Tregaskiss is pleased to announce improvements to the design of its cutter blades for use with the TOUGH GUN® TT3 reamer and TOUGH GARD® spatter cleaner robotic nozzle cleaning stations. These new cutter blades are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking. The twin flute […] - PRODUCT IMPROVEMENT- Tregaskiss Automatic MIG Gun Series Handles
March 1, 2013 Tregaskiss is pleased to announce an improvement to our fixed automatic series MIG guns. These robust machine torches are engineered for hard tooling applications requiring a durable welding torch, and they now feature a one-piece high strength phenolic handle. OLD Design NEW Design - NEW PRODUCT – TOUGH GUN TT3 Reamer
TOUGH GUN TT3 Reamer April 1, 2013 More Reliable and Easier to Maintain Than Ever Before! Introducing the next evolution of the TOUGH GUN® reamer from Tregaskiss. Improvements to the sprayer system, new plug and play replacement parts, and simplified internal wiring make this new reamer more reliable and faster and easier to maintain than […] - PRODUCT IMPROVEMENT – Reamer Cutter Blades
November 12, 2010 Effective Monday, November 12, 2010, Tregaskiss has released a new design for the TOUGH GUN® reamer cutter blades. The new product is made in North America and has passed a series of stringent tests. As a result, we are proud to implement this product, approved by the Tregaskiss Engineering team, as our […] - PRODUCT IMPROVEMENT – Solenoid Valve for TOUGH GUN Reamer Robotic Nozzle Cleaning Stations
May 7, 2008 Previously we have supplied the type of TR-2210 solenoid valves (made by SMC) for the TOUGH GUN® reamer as shown in the image on the left (OLD). We now offer an improved DIN connection for this product (also from SMC) shown in the image on the right (NEW). This new product is rated “IP65” (as defined […] - PRODUCT IMPROVEMENT – TOUGH GUN Sprayer
August 21, 2008 The TOUGH GUN® sprayer, used as a stand-alone unit or on a TOUGH GUN reamer, has been improved in the following ways: The reservoir is now made of nylon rather than Polycarbonate. The nylon material has proven to be more durable over time when compared with Polycarbonate. (NOTE: The nylon material is […] - PRODUCT IMPROVEMENT – Wire Cutter BladesMay 14, 2008 The design of the wire cutter blade has been improved to more securely fasten to the TOUGH GUN® wire cutter (WC-100). The WC-100-7 wire cutter blade kit includes the new blade and insert, and is backwards compatible with older wire cutters. Product insert INS049 provides installation and replacement instructions. Factory-installed wire cutter […]
- NEW PRODUCT – Next Generation TOUGH GUN Reamer
March 2, 2008 The TOUGH GUN Reamer just got TOUGHER! The next generation TOUGH GUN® reamer will knock you out with its powerful one-two punch: Rugged durability PLUS new features that improve reliability, ease maintenance, and provide a safer and more accurate setup. Watch our online animation to learn more about the Next Generation TOUGH […]