PRODUCT IMPROVEMENT —
Electronic Check Valve and Mounting Bracket Added to the TOUGH GUN TT3 Reamer

August 11, 2014

Image of TOUGH GUN TT3 Reamer with Electronic Check Valve and Mounting Bracket

An electronic check valve and mounting bracket have been added to the TOUGH GUN® TT3 reamer. This improvement provides added protection against leakage from the sprayer reservoir.  

Since this addition affects the wiring slightly, updated wiring diagram instructions are provided with every affected unit.

A TOUGH GUN TT3 reamer sprayer valve retrofit kit (part #TT3-500R) is available for units manufactured prior to August 11, 2014.

How Do I Know If I Need to Retrofit My Reamer?

If your TOUGH GUN TT3 reamer:

  • has a spray head that pools or leaks anti-spatter once the system is primed;
  • has an elevated multi-feed / bulkfeed source (drum / pail located on top of the mezzanine);
  • is mounted on an angle (baseplate is not parallel with the floor);

you will require the TOUGH GUN TT3 reamer sprayer valve retrofit kit #TT3-500R to fix any issues that you may be experiencing. Installation of this kit should take approximately 15 minutes.

Click here for complete step by step installation instructions.