How To Upgrade from Conventional Liners to QUICK LOAD Liners
Replace Your Liner in Less Than 1/2 the Time with the QUICK LOAD® Liner from Tregaskiss!
To convert to the QUICK LOAD Liner, update your conventional liner part number as per the chart below.
QUICK LOAD Liner Conversion Chart
| Wire Size | QUICK LOAD Liner | Replaces Conventional Liner | Description | Length | I.D. |
|---|---|---|---|---|---|
| 0.023″ | 415-23-15Q | 415-23-15 | High Carbon Steel – Round Wound | 16.5′ | 0.050″ |
| 0.030″ | 415-30-6Q | 415-30-6 | High Carbon Steel – Round Wound | 7.5′ | 0.062″ |
| 0.030″ | 415-30-15Q | 415-30-15 | High Carbon Steel – Round Wound | 16.5′ | 0.062″ |
| 0.035″-0.045″ | 415-35-6Q | 415-35-6 | High Carbon Steel – Round Wound | 7.5′ | 0.075″ |
| 0.035″-0.045″ | 415-35-10Q | 415-35-10 | High Carbon Steel – Round Wound | 11.5′ | 0.075″ |
| 0.035″-0.045″ | 415-35-15Q | 415-35-15 | High Carbon Steel – Round Wound | 16.5′ | 0.075″ |
| 0.035″-0.045″ | 415-35-25Q | 415-35-25 | High Carbon Steel – Round Wound | 26.5′ | 0.075″ |
| 0.045″-1/16″ | 415-116-6Q | 415-116-6 | High Carbon Steel – Round Wound | 7.5′ | 0.089″ |
| 0.045″-1/16″ | 415-116-10Q | 415-116-10 | High Carbon Steel – Round Wound | 11.5′ | 0.089″ |
| 0.045″-1/16″ | 415-116-15Q | 415-116-15 | High Carbon Steel – Round Wound | 16.5′ | 0.089″ |
| 0.045″-1/16″ | 415-116-25Q | 415-116-25 | High Carbon Steel – Round Wound | 26.5′ | 0.089″ |
| 1/16″-5/64″ | 415-564-6Q | 415-564-6 | High Carbon Steel – Round Wound | 7.5′ | 0.097″ |
| 1/16″-5/64″ | 415-564-15Q | 415-564-15 | High Carbon Steel – Round Wound | 16.5′ | 0.097″ |
| 1/16″-5/64″ | 415-564-25Q | 415-564-25 | High Carbon Steel – Round Wound | 26.5′ | 0.097″ |
| 0.078″-3/32″ | 415-332-6Q | 415-332-6 | High Carbon Steel – Flat Wound | 7.5′ | 0.125″ |
| 0.078″-3/32″ | 415-332-15Q | 415-332-15 | High Carbon Steel – Flat Wound | 16.5′ | 0.125″ |
| 0.078″-3/32″ | 415-332-25Q | 415-332-25 | High Carbon Steel – Flat Wound | 26.5′ | 0.125″ |
*Compatible with Tregaskiss® TOUGH GUN® Robotic and Fixed Automatic MIG Guns, Bernard® BTB Semi-Automatic MIG Guns, and Bernard TGX® Semi-Automatic MIG Guns
**Compatible with most Tweco® MIG Guns
Benefits of the QUICK LOAD Liner System:
- Requires less than 1/2 the time and effort to replace (compared to conventional liners)
- Liner replacement occurs through the neck of the MIG gun
- Gun remains attached to the feeder
- No need to cut and waste wire!
- No need to climb up to change liners in semi-automatic guns connected to boom mounted feeders
- Change liner from safe zone within the robotic cell during routine pauses in production
INS065 REV 11/11