Neck Checking Fixture

The TOUGH GUN® neck checking fixture tests the tolerance of a robotic MIG gun’s neck to tool center point (TCP). Should the neck be out of tolerance due to impact or prolonged usage, this fixture can be used to realign the neck.

  • Prolongs the life of your neck — readjust a bent neck instead of replacing it
  • Prevents costly rework due to missed weld joints
  • Prevents downtime for reprogramming the robot to match a bent neck
  • Heavy duty precision-tooled steel base
  • Realigns neck tool center point (TCP)
  • Accommodates all standard sized necks

Neck Compatibility

22 DegreeAir-Cooled NeckTOUGH GUN I.C.E. Neck
Short length405-22QC590-22-x.xxx*
Medium length405-22QCL590-22L-x.xxx*
Long length405-22QCL1590-22L1-x.xxx*
*x.xxx represents nozzle O.D. (i.e. 590-22L-0.938)

45 DegreeAir-Cooled NeckTOUGH GUN I.C.E. Neck
Short length405-45QC590-45-x.xxx*
Medium length405-45QCL590-45L-x.xxx*
Long length405-45QCL1590-45L1-x.xxx*
Extended length405-45QCL2590-45L2-x.xxx*
*x.xxx represents nozzle O.D. (i.e. 590-45L-0.938)

180 DegreeAir-Cooled NeckTOUGH GUN I.C.E. Neck
Short length405-180QC590-180-x.xxx*
*x.xxx represents nozzle O.D. (i.e. 590-180-0.938)
G-405CAChecking fixture for quick-change air-cooled neck
G-405CA and G-495-8Checking fixture for TOUGH GUN I.C.E.® setup