How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin


Step 1 

CAUTION – Turn off machine.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 1

Step 2

Trim ball from wire.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, Image 2

Step 3

Remove consumables and old liner.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 3

Step 4

Straighten gun cable.  Install new QUICK LOAD Liner over the wire.  Use short pushes  (to avoid kinking) until the liner seats in power pin.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 4

Step 5

Push the liner into the neck.  Release and push several times to confirm it freely springs back.  Slide trim gauge over liner to neck.

STEP 5

Step 6

Push liner in as far as you can and then pinch gauge to hold it in place.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 6

Step 7

Trim liner flush with gauge.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 7

Step 8

Release pinch on liner – it should spring out of the neck to a length of
1 3/4”. DO NOT RE-TRIM LINER.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 6

Step 9

Push liner back into the gun as you reinstall consumables.  DO NOT TRIM LINER.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 9

Step 10

Turn machine back on.

How To Install or Replace a QUICK LOAD Liner in a Bernard MIG Gun Equipped With an AutoLength Pin, image 10

Back To Top