Documentation Category: How-To Guides

Learn how to correctly trim a conventional liner on the BTB Semi-Automatic MIG Guns

Learn how to change TOUGH LOCK consumables on the Bernard BTB Semi-Automatic MIG Guns

This video will take you through the steps of how to setup the TOUGH GARD™ Anti-Spatter Multi-Feed System with TOUGH GUN Reamers.

Learn how to replace the switch on a T Series BTB Semi-Automatic MIG Gun

Learn how to replace a rotatable neck on a BTB Semi-Automatic MIG Guns

Learn how to install a rotatable neck jump liner on a BTB Semi-Automatic MIG Gun

Learn how to change a change a Fixed Neck to a Rotatable Neck on a Bernard BTB Semi-Automatic MIG Gun

Learn how to change a Miller Power Pin on a Bernard BTB Semi-Automatic MIG Gun

Learn how to repair a unicable on a Bernard BTB MIG Gun

Learn how to change Quik Tip consumables on the Bernard BTB Semi-Automatic MIG Guns

Learn how to change Centerfire consumables on the Bernard BTB Semi-Automatic MIG Guns

Learn how to convert TOUGH LOCK to AccuLock S Consumables on your Bernard BTB MIG gun.

Learn how to convert Bernard Centerfire to AccuLock S Consumables on your Bernard BTB MIG gun.

Warning read and follow all labels and the owner’s manual. Disconnect the power pin from the machine and cut the wire.Remove the nozzle.Using a ¾” wrench loosen the diffuser with the contact tip and remove by hand.Using a half inch wrench remove the power pin capRemove the neck insulator if it needs to be replaced.Lay the […]

Learn how to replace a QUICK LOAD Liner on a Bernard BTB MIG gun.

Learn how to replace a conventional liner with a QUICK LOAD Liner on a Bernard BTB MIG gun

Learn about the innovative QUICK LOAD Liners from Tregaskiss install from the front of the MIG gun in less than half the time required to install conventional liners, increasing uptime, cost savings and safety.

Learn how to replace a dual shunt cable on a TOUGH GUN TA3 Robotic Air-Cooled MIG Gun.

Learn how to change the 4-sided v-block in the TOUGH GUN Reamer to accommodate whichever Tregaskiss Nozzle you’ll be using for your welding application.

This video will take you through the steps of how to replace a spindle on a TOUGH GUN Reamer.

This video will take you through the steps of how to install a spray containment unit on a TOUGH GUN Reamer.

This video take you through the steps of how to maintain a lubricator on a TOUGH GUN Reamer.