Power Pins

Group of four power pins for MIG welding guns

Power pins provide a direct connection for wire, electrical current and gas flow between various feeder models and MIG welding guns. Power pins thread in easily to the rear gun handle block. Tightening the power pin with a wrench is recommended to ensure a tight connection.

Power Pins for BTB, TGX® and Legacy T-Gun™ Semi-Automatic Air-Cooled MIG Guns

For Airco® Feeders

5060Tfor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For ESAB® Feeders

5060Tfor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For ESAB® NAS Feeders

214-12for models: Multimaster 260, DuraDrive 4-30, DuraDrive 4-48

For Hobart® Feeders

2200137for models: Ironman Series
214for models: BETA-MIG Series, Digital 2000, Dual Digital, PortaFeed Series, UltraFeed Series, Handler
214-12for models: 200, 2400 (Large Pin)

For L-Tec® Feeders

5060Tfor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For Lincoln® Feeders

214for models: SP-85, SP-86, SP-100, SP-100T, SP-125plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak10, MIG Pak 55, WELD Pak 100
214-2-1for models: LN7, LN8, LN9, LN-22, LN-23P, LN-25, Suitcase, LN-741, LN-742, Synergic 7

For Miller® Feeders

2200137for all models except 10 Series, 30 Series, 35 Series, 70 Series, 80 Series, MIGman and XRA
2200140for models: 10 Series, 10E, 30 Series, 30A, 30B, 30E, 70 Series, 70A, 80 Series, 80A, MM10A, XRA

For OTC Daihen® Feeders

2200140for models: CM-145, CM-146, CM-147, CM-231, CM-747, DynaAuto

For OXO™ Feeders

427-12for models: AVC-8Q, AVC-30Q

For Thermal Arc® Feeders

214for models: 210GM, 250GM, DIGITAL 2000, TAF-2, TAF-4

Power Pins for Legacy Q-Gun™ and S-Gun™ Semi-Automatic Air-Cooled MIG Guns

2200098for Hobart® feeder connections
2200099for Lincoln® feeder connections
2200101for Miller® feeder connections
2200102for National® feeder connections
2200108for OXO™ feeder connections
2200118for Tweco® #4 feeder connections
2200104for Tweco #5 feeder connections

Power Pin Kits for BTB, TGX and Legacy T-Gun™ Semi-Automatic Air-Cooled MIG Guns

For Airco® Feeders

1880259Efor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For ESAB® Feeders

1880259Efor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For ESAB® NAS Feeders

1880259T4for models: Multimaster 260, DuraDrive 4-30, DuraDrive 4-48

For Hobart® Feeders

1880259Mfor models: Ironman Series
1880259T4for models: BETA-MIG Series, Digital 2000, Dual Digital, PortaFeed Series, UltraFeed Series, Handler
1880259T5for models: 200, 2400 (Large Pin)

For L-Tec® Feeders

1880259Efor models: ME-2, MIGMaster Series, DigiMIG Dual, DigiPlus, DigiPulse, DipStick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4 HD, MIGhty V, Universal V, MIG 2E, MIG 4HD

For Lincoln® Feeders

1880259T4for models: SP-85, SP-86, SP-100, SP-100T, SP-125plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak10, MIG Pak 55, WELD Pak 100
1880259Lfor models: LN7, LN8, LN9, LN-22, LN-23P, LN-25, Suitcase, LN-741, LN-742, Synergic 7

For Miller® Feeders

1880259Mfor all models except 10 Series, 30 Series, 35 Series, 70 Series, 80 Series, MIGman and XRA
1880259BBernard™ Quick Disconnect Kit for models: 10 Series, 10E, 30 Series, 30A, 30B, 30E, 70 Series, 70A, 80 Series, 80A, MM10A, XRA

For OTC Daihen® Feeders

1880259BBernard Quick Disconnect Kit for models: CM-145, CM-146, CM-147, CM-231, CM-747, DynaAuto

For OXO™ Feeders

1880259Xfor models: AVC-8Q, AVC-30Q

For Thermal Arc® Feeders

1880259T4for models: 210GM, 250GM, DIGITAL 2000, TAF-2, TAF-4

Direct Plug Kits for Legacy Q-Gun™ and S-Gun™ Semi-Automatic Air-Cooled MIG Guns

1199Efor Euro style feeder connections
1199Hfor Hobart® feeder connections
1199Lfor Lincoln® feeder connections
1199Mfor Miller® feeder connections
1199Nfor National® feeder connections
1199Xfor OXO™ feeder connections
1199T4for Tweco® #4 feeder connections
1199T5for Tweco #5 feeder connections

If your feeder does not appear in the charts above, please see our quick-connect blocks and adaptors page for additional connection options.

If your feeder does not appear in the charts above, please see our quick-connect blocks and adaptors page for additional connection options.

For Airco® Feeders

425 for models: Auto-Pack 130, Dip-Pack 200 (New), Dipstick 160 (New), System, Universal, MIGhty 1, Med20, Med20 Synergic, Med40, Med40 Synergic

For Century® Feeders

425for models: All Star, Solar 2-125 (Old), Solar165 117-003
214-5for models: Century (Powcon® feeder)

For Cloos® Feeders

214-42for models: Euro style

For ESAB® Feeders

425for models: Med30, MIG 2E, MIG 4HD, MIG 4HD Dual, Mobile Master, ESAB MIG C420
414-12    for models: Non-Euro
214-4for models: feeders with “MT”-style Quick Connect Block

For Fronius® Feeders

214-41for models: ThruArm™ Style: VR 1500 M, VR 1500 PAP

For Hansen® Feeders

425for models: MIG 160, 1000, 2000

For Hobart® Feeders

214for models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC
214-4for models: Handler 120, 150, Beta-MIG 170, Beta-MIG 200,  Porta-Wire CC/CV, 2200 Feeder, 2210 Feeder
214-1for models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275
214-12for models: 200, 2400 (large pin)
214-29for models: Handler 135, Handler 175

For Lincoln® Feeders

214for models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250
214-7for models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7
214-2for models: LN7, LN8, LN9, LN22, LN25, Suitcase, LN742, Synergic 7
425for models: PowerWave 450, Syndergic 7
214-40for models: PowerWave 4R Series

For Linde® / L-Tec® Feeders

425for models: MIGMaster 250, 4HD, MIG2E

For Miller® Feeders

214-1(Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115
214-6-116    (Semi-Automatic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115
214-29for models: Firefly 130

For OTC Daihen® Feeders

214-39for models: CM741, CMRE741, AF4001, New D Series

For OXO™ Feeders

427for models: PS-60Q, AVC-30Q

For Panasonic® Feeders

214-13for models: Panasonic, Gun Slinger 260
214-30for all models (push-to-connect gas fitting)

For Powcon® Feeders

425for models: PD10, 22 Series, 60 Series, PDVS11
214for models: PD1, PD2

For Snap-On® Feeders

214for models: FM140A

For Hobart® Feeders

214Wfor models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC
214-1Wfor models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275
214-12W    
for models: 200, 2400 (large pin)

For Lincoln® Feeders

214Wfor models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250
214-7Wfor models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7
214-40Wfor models: PowerWave 4R Series

For Miller® Feeders

214-1W(Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115

For Panasonic® Feeders

214-30Wfor all models (push-to-connect gas fitting)

For Powcon® Feeders

214Wfor models: PD1, PD2

For Snap-On® Feeders

214Wfor models: FM140A