How To Install a TOUGH GUN I.C.E. Neck Assembly on TOUGH GUN G1 Series Robotic Guns

TOUGH GUN I.C.E.® components will come assembled on your MIG gun. You will need to remove the TOUGH GUN I.C.E. neck assembly to install it on the robot.

Step 1:

Remove front-end consumables.
Disconnect both water lines at the Quick Connect coupler.

How To Install a TOUGH GUN I.C.E. Neck Assembly on TOUGH GUN G1 Series Robotic Guns, STEP ONE

Step 2:

Loosen neck bolt.
Remove TOUGH GUN I.C.E. neck assembly

Step 3:

Insert the connector housing of the new torch into the mounting arm.
NOTE: If existing clamping device on the arm has 2 bolts, remove only the front bolt and snug the rear bolt.

Step 4:

Reinstall TOUGH GUN I.C.E. neck assembly.
Tighten the neck bolt to torque specification on the torch (60 in.-lbs. or 7Nm).

Step 5:

Reinstall front-end consumables.
Connect water lines with the Quick Connect coupler.
Fasten water line bracket with bolt (bracket and bolt included in the TOUGH GUN I.C.E. package).

INS045 REV 02/05

As manufacturers of semi-automatic, fixed automatic and robotic MIG guns and consumables, Tregaskiss and Bernard have earned a reputation as an experienced, dependable partner to its customers in the automotive, construction and fabrication, heavy equipment, ship, rail, general manufacturing, commercial truck and trailer, and oil and gas industries. Tregaskiss and Bernard offer air-cooled semi-automatic, fixed automatic and robotic MIG guns, water-cooled semi-automatic, fixed automatic and robotic MIG guns, reamers, nozzle cleaning stations, anti-spatter liquid, wire cutters, anti-spatter sprayers, clutches, welding consumables, nozzles, MIG welding tips, and MIG welding torches.