Archives: Products

Power Through Weld Spatter for Increased Uptime and Weld Quality The TOUGH GUN® TT4A reamer is a robotic nozzle cleaning solution that maximizes uptime through superior cleaning performance, high durability components and features that allow quick and easy maintenance.You’ll spend less time maintaining and troubleshooting your robotic welding equipment and more time getting product out […]

For use with TOUGH GUN® ThruArm® series robotic MIG guns, low-stress robotic LSR+ (Low-Stress Robotic) unicables incorporate new SmoothTurn™ technology to maximize production uptime. Conventional style unicables typically come with a connection that limits rotational capabilities and produces torsional stress in the cable. Unlike conventional unicables, the LSR+ incorporates a rotating power connection that reduces […]

This is just a test product.

Cost-effective and gets you back on the job within minutes! Bernard® jump liners replace only the most commonly worn and clogged liner area to reduce the amount of time a gun is offline and minimize inventory. These jump liners allow for quick and easy neck change-out so the gun can be easily adapted to fit […]

Tregaskiss® auto heads are designed for direct connection to a wire feeder in automatic applications, and incorporate the same robust features as Tregaskiss fixed automatic MIG guns. Tregaskiss auto heads are available in air-cooled models and models enhanced with TOUGH GUN I.C.E.® technology. SpecsConsumables Processes MIG (GMAW) welding Duty Cycle Ratings 100%: 550 amp CO2 gas and […]

Simplify and Reduce Your Inventory These Bernard® conventional liners allow you to simplify and reduce your inventory, and are made of high carbon music wire for smooth wire feed and long life. CompatibilitySpecsPart Numbers Compatibility Bernard conventional liners are compatible with the following MIG welding guns: BTB semi-automatic air-cooled MIG gunsLegacy Q-Gun™, S-Gun™ and T-Gun™ […]

Load and Lock for better productivity Load and Lock to reduce troubleshooting, downtime and rework Load and Lock for better productivity Bernard® AccuLock™ S liners are a critical component of the new AccuLock S consumables system. This new consumable system was designed to address liner trim length errors, gaps along the wire-feed path and erratic […]

Conventional liners for MIG welding guns are made of high carbon music wire for smooth wire feed and long life. Available for mild steel, aluminum, stainless steel and flux-cored wire in lengths of up to 25 feet (7.6 m) for all wire sizes, these rear-loading liners thread in with no need for set screws. Part […]

TGX MIG Guns Bernard® TGX® semi-automatic air-cooled MIG guns are perfect for low volume, light- to medium-duty welding and a durable, attractively priced choice. TGX MIG guns are ideally suited for lower amperage welding applications and shorter arc-on times. OverviewSpecsConfiguratorConsumables Choose between two TGX programs: TGX Easy As 1-2-3! The TGX Easy As 1-2-3! program […]

Less changeouts. Less troubleshooting. More throughput. The longer lifespan of AccuLock™ contact tips means fewer human interactions within your welding cells and fewer accidental errors as a result. With contact tip cross-threading issues also virtually eliminated, you’ll spend less time troubleshooting and more time on proactive weld quality and productivity initiatives. Simplified installation to reduce […]

Less Troubleshooting. Less Training. More Confidence. As you support more inexperienced welders, choosing equipment with fewer points of failure and simplified maintenance can reduce training and shorten your troubleshooting list. Bernard® AccuLock™ S consumables provide error-proof installation and a dual-locked concentrically aligned liner to eliminate erratic wire feeding. All are costly contributors to troubleshooting, rework […]

Nozzle Detection for the TOUGH GUN® TT3 and TT3E reamer uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the nozzle is […]

NEW! Now Available With AccuLock™ R Consumables Tregaskiss® MW1 fixed automatic water-cooled MIG guns are engineered for hard tooling automation applications requiring a simple, durable and repeatable MIG gun that maximizes uptime and throughput. These MIG welding guns are available in 500 and 600 amp models, and high performance consumables, armored neck and body and […]

NEW! Now Available With AccuLock™ R Consumables Tregaskiss® MA1 fixed automatic air-cooled MIG guns are engineered for hard tooling automation applications requiring a simple, durable and repeatable MIG gun. These MIG welding guns are available in 350 and 385 amp models, and are compatible with TOUGH GUN I.C.E.® technology. Achieve maximum uptime and throughput, and […]

NEW! Now Available with AccuLock™ R Consumables Tregaskiss® AW2 fixed automatic water-cooled MIG guns are designed for dependable performance in high amperage, high temperature hard tooling welding applications. Choose from two barrel lengths to better reach the weld. Available with or without a cable, this MIG gun adapts easily to most applications. Maintenance personnel appreciate […]

Custom height. Quick installation. Easy on the budget. Tregaskiss provides a simple fixed height durable stand for all TOUGH GUN® TT3 and TOUGH GUN TT3E reamer models. Each TOUGH GUN reamer stand can be ordered to a custom height between 18- and 45-inches. OverviewSpecsPart Numbers Competitively priced due to simplified designFacilitates quick and accurate reamer […]

The filter/regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN® TT3 (analog) or TT3E (Ethernet) reamer. OverviewPart Numbers The filter cleans the air supply to the reamer and restricts debris from reaching the motor, keeping it uncontaminated and ensuring maximium performance and longer lifeThe regulator works to […]

This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor, and is highly recommended for use in damp and moisture rich environments. OverviewPart Numbers Factory set for optimal pneumatic oil lubrication, the lubricator is available as an option when configuring your new unit or is […]

Designed to meet the needs of the shipbuilding and construction industries, the Bernard® S-Gun™ 250 amp semi-automatic air-cooled gun model offers a locked rotatable neck that cannot be easily removed by the welding operator, but is still readily serviceable by maintenance. The result is less time spent by welders at the beginning of a shift […]

A perfect addition to the TOUGH GUN® TT3 Reamer The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal, which can be shared among several spray containment units […]

New Ethernet Communications Capability The new TOUGH GUN® TT3E reamer robotic nozzle cleaning station from Tregaskiss continues to offer the same high levels of durability, serviceability and repeatability, and is now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. Access the program software from […]

Maximize Throughput. Minimize Costs. Designed with our unique and durable low-stress robotic (LSR+) unicable, TOUGH GUN® TA3 robotic air-cooled MIG guns feed through the robot arm and provide outstanding precision and reliability. The TOUGH GUN TA3 MIG gun combines the most valuable product options from our legacy TOUGH GUN ThruArm G1 and G2 series platforms, […]

Maximize Throughput. Minimize Costs. Designed for high-volume production environments, TOUGH GUN® CA3 robotic air-cooled MIG guns are engineered for precision, durability, accuracy, repeatability, minimal downtime and fast and easy maintenance. OverviewSpecsConfiguratorConsumablesAccessories Replaceable conventional unicable design offers extended service life and ease of serviceabilityDual layer cable outer jacket, re-engineered cable guide and increased copper content contribute […]

Optimize for Productivity. Standardize for Simplicity. Build your ultimate MIG gun. Choose from a variety of necks, handles and trigger styles to optimize welder ergonomics and weld access ‒ plus, standardize with a single line of consumables to simplify maintenance and contain costs. You can count on Bernard BTB semi-automatic air-cooled MIG guns to deliver […]