TOUGH GUN® LSR+ (Low-Stress Robotic) Unicables For use with TOUGH GUN® ThruArm® series robotic MIG guns, low-stress robotic LSR+ (Low-Stress Robotic) unicables incorporate new SmoothTurn™ technology to maximize production uptime. Conventional style unicables typically come with a connection that limits rotational capabilities and produces torsional stress in the cable. Unlike conventional unicables, the LSR+ incorporates […]
Nozzle Detect Nozzle Detection for the TOUGH GUN® TT3 and TT3E reamer uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the […]
TOUGH GUN Reamer Stand Custom height. Quick installation. Easy on the budget. Tregaskiss provides a simple fixed height durable stand for all TOUGH GUN® TT3 and TOUGH GUN TT3E reamer models. Each TOUGH GUN reamer stand can be ordered to a custom height between 18- and 45-inches.
Filter/Regulator The filter/regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN® TT3 (analog) or TT3E (Ethernet) reamer.
Dedicated Motor Lubricator This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor, and is highly recommended for use in damp and moisture rich environments.
Spray Containment A perfect addition to the TOUGH GUN® TT3 Reamer The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal, which can be shared among several spray […]
TOUGH GUN Cutter Blades Reliable and Durable. Competitive pricing. TOUGH GUN® cutter blades are designed for use with the TOUGH GUN TT3 or TT3E reamer and are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking. Designed with stronger edges to allow for improved cutting and cleaning performance, these cutter […]
TOUGH GARD Anti-Spatter Liquid TOUGH GARD® anti-spatter liquid is a ready-to-use water-soluble, non-toxic product developed to address the performance and environmental concerns of metal fabricators. Unlike oil-based anti-spatter solutions, TOUGH GARD anti-spatter liquid won’t clog the sprayer. By prolonging the life of your consumables and reducing the need for downtime, TOUGH GARD anti-spatter liquid can […]
TOUGH GARD Anti-Spatter Multi-Feed System Lower your operating costs, minimize downtime and increase safety by introducing a TOUGH GARD® Anti-Spatter Multi-Feed System to your facility. Eliminate the need to frequently refill sprayer reservoirs and feed up to 10 TOUGH GUN® reamer units from a single 5-gallon or 55-gallon drum of TOUGH GARD anti-spatter liquid.
Neck Checking Fixture The TOUGH GUN® neck checking fixture tests the tolerance of a robotic MIG gun’s neck to tool center point (TCP). Should the neck be out of tolerance due to impact or prolonged usage, this fixture can be used to realign the neck.
Insulating Discs TOUGH GUN® insulating discs are a recommended component for all TOUGH GUN robotic MIG gun installations.
Clamps and Mounting Arms Built tough, TOUGH GUN® clamps and mounting arms from Tregaskiss are machined from solid extruded aluminum alloy so they won’t bend or break. Engineered to fit the TOUGH GUN CA3 robotic air-cooled MIG gun, these clamps and mounting arms provide a wide bearing surface for optimum purchase and strength.
Legacy TOUGH GUN Clutch Compatible with TOUGH GUN® CA3 and legacy TOUGH GUN G1 series robotic air-cooled MIG guns, the original TOUGH GUN clutch is engineered for demanding production environments and is designed to e-stop your robot with a deflection of only 1 degree.
TOUGH GUN Anti-Spatter Sprayer Preventing spatter build-up boosts your productivity by maintaining consistent weld quality and reducing downtime for routine maintenance. Combine the TOUGH GUN® anti-spatter sprayer with a TOUGH GUN TT3 or TT3E reamer and TOUGH GARD® anti-spatter liquid to create the ultimate nozzle cleaning station and maintenance system.
TOUGH GUN Wire Cutter The TOUGH GUN® wire cutter from Tregaskiss removes the ball at the end of the welding wire to provide smooth arc starts and consistent wire stick-out. This system cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16″ (1.6 mm).